Serial Console
Use the Communication Console to send control commands directly from the FRAMR. Cockpit to a FRAMR. Player. The player executes the command or forwards it to a connected external device using the selected control protocol.
Typical use cases include turning a display on or off, switching an input source, sending RS232 commands, TCP/UDP commands, or controlling LED wall functions.
Method
In the Type field, you select how the command should be executed.
Port
Specify the target port through which communication with the connected device takes place. Ports 0 to 15 are available in the form.
Baud Rate
Set the transmission speed of the serial connection. This must match the settings of the connected device.
Data
Enter the command or data string that should be sent via the serial interface. Hexadecimal values must be marked with \x.
In the Type field, you select how the command should be executed.
- Wired: RS232, HDMI-CEC
- Network: TCP, UDP
- LED Wall: LED brightness, LED test
Port
Specify the target port through which communication with the connected device takes place. Ports 0 to 15 are available in the form.
Baud Rate
Set the transmission speed of the serial connection. This must match the settings of the connected device.
Data
Enter the command or data string that should be sent via the serial interface. Hexadecimal values must be marked with \x.